Application to use, repair or modify a dredge

For updated information relating to the information on this page go to Use of a dredge.

On 31 March 2022, the Work Health and Safety (WHS) laws replaced the health and safety elements of the Mines Safety and Inspection laws. For information visit www.dmirs.wa.gov.au/whs

Transitional arrangements may be in place for the compliance requirements on this page.

All health and safety notifications, forms and guidance for mining and petroleum has moved to the WorkSafe website

The information below has been left for historical compliance reference purposes

 

 

Dredge applications must be submitted online using the Approvals sub-system in the Safety Regulation System (SRS)

Applications must use the approved pro forma

Who is responsible for the notification?

The registered manager is required to notify, and receive approval from, the state mining engineer before:

  • use of a dredge
  • repair or modification of a dredge

Refer to rr. 14.3, 14.4 and 14.5 of the Mines Safety and Inspection Regulations 1995.

The requirements for dredges are mainly given in Part 14 of the Mines Safety and Inspection Regulations 1995 and relevant Australian Standards.

Required information

Depending on the nature of the mining operation, only the relevant part(s) of the application need to be completed. However, the items must be addressed in sufficient detail for the application to be properly assessed.

Additional information may be requested after the application is lodged.

Lodging the application

Dredge applications and all supporting documents must be submitted online using the Approvals sub-system in the Safety Regulation System (SRS).

The registered manager is required to notify, and receive approval from, the state mining engineer via SRS.

An SRS Company Administrator (CA) or a Company Representative (CR) can enter information into SRS. The CA can assign the role of CR to any person(s) you nominate to liaise with the Department regarding the submission.

Further information is available at Safety Regulation System (SRS)

Who can I contact?

For SRS queries:
SRS Manager
Email: SRSManager@dmirs.wa.gov.au
Phone: 1300 307 877

Contact an inspector of mines:
Email: Safety@dmirs.wa.gov.au
Phone: 1300 307 877